|
Extended
technical assistance
most evenings/weekends.
866-401-3877 |
|
CU2571-0, Motor Mounts, Ultra-Flex Rubber
|
|
|
|
Pair Stock-Height Ultra-Flex Rubber Motor Mounts for 2.5L Jeep
The Brown Dog has friends with Cherokee XJ who have experienced a sagging motor mount. This is why we engineered these replacement motor mounts for extreme strength. You'll find these mounts a serious upgrade from most other mounts, too. The double-stud mount, used on right (passenger-side only) replaces Jeep part number J3242177. The left (driver-side mount) replaces Jeep part number 52000074 and 52007394.
High Performance Design.
We use steel and feature double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull a set of mounts off the shelf and put them through our 20-Ton Press Test. We have yet to see a Brown Dog MM or MML with a structural failure.
Featuring Ultra-Flex Rubber Bushings.
These Brown Dog motor mounts feature our proprietary Ultra-Flex Rubber bushings designed to dampen drive-train vibration. If this is your daily driver, you may find these bushings well worth the extra money. Should you ever need to replace the bushings, well have them. Prefer Classic Polyurethane bushings? We offer all motor mounts and motor mount lifts with either polyurethane or rubber to match your preference. Not sure which is for you? Click here.
Backed by Brown Dog Promise.
Brown Dog motor mounts will be the last set of mounts you'll need. The Brown Dog gives you his promise.
Free Shipping.
All products ship free to all USA and APO/FPO addresses. International customers pay reasonable shipping fee. Never a "handling fee." Click here for more information.
Installation Notes
-
Engine remains in stock position.
-
Mounts bolt directly to the pylons, in the identical position of the stock mounts and are for use with OE engine brackets.
-
Carefully inspect engine brackets for any excess wear, especially cracks. The original brackets weren't designed to handle the strength of these high-performance motor mounts. If engine brackets need replaced, do NOT order these mounts. Instead, order the appropriate upgrade kit.
- Tighten through-bolts (bolt that goes through bracket arms and motor mount) snug. Do not overtighten locknuts on throughbolts.
-
Bolts to pylons should be tightened like most others on your Jeep frame. Nice and tight.
-
If you have any questions during installation or believe a part will not fit, do NOT alter the part. Call Brown Dog, 866 401-3877. We have extended support to assist with installation.
Application Notes
Fits Jeep vehicles below.
-
Jeep Cherokee XJ, 1984-2000, 2.5L
-
Jeep Comanche MJ, 1987-1992, 2.5L
-
Jeep Wagoneer SJ, 1984-1987, 2.5L
|
|
|
|