|
Extended
technical assistance
most evenings/weekends.
866-401-3877 |
|
C2571-0, Motor Mounts, Classic Polyurethane
|
|
|
|
Pair Stock-Height Classic Polyurethane Motor Mounts
The Brown Dog has friends with Cherokee XJ who have experienced a sagging motor mount. This is why we engineered these replacement motor mounts for extreme strength. You'll find these mounts a serious upgrade from most other mounts, too. The double-stud mount, used on right (passenger-side only) replaces Jeep part number J3242177. The left (driver-side mount) replaces Jeep part number 52000074 and 52007394.
High Performance Design.
We use steel and feature double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull a set of mounts off the shelf and put them through our 20-Ton Press Test. We have yet to see a Brown Dog MM or MML with a structural failure.
Featuring Classic Polyurethane Bushings.
The Classic Polyurethane bushings in this set of Brown Dog motor mounts will give your rig a sportier feel. If the bushings ever start to wear, replacements are available from Brown Dog Offroad. Prefer our proprietary Ultra-Flex Rubber bushings? We offer all motor mounts and motor mount lifts with either polyurethane or rubber to match your preference. Not sure which is for you? Click here.
Free Shipping.
All products ship free to all USA and APO/FPO addresses. International customers pay reasonable shipping fee. Never a "handling fee." Click here for shipping policy.
Installation Notes
-
Engine remains in stock position.
-
Mounts bolt directly to the pylons, in the identical position of the stock mounts and are for use with OE engine brackets.
-
Carefully inspect engine brackets for any excess wear, especially cracks. The original brackets weren't designed to handle the strength of these high-performance motor mounts. If engine brackets need replaced, do NOT order these mounts. Instead, order the appropriate upgrade kit.
-
If 1991-1996 2.5L XJ, 1991-1995 2.5L YJ, or 1991-1992 2.5L MJ, order X2569-0 Upgrade Kit which includes Classic Polyurethane motor mounts, engine brackets and the mount support cradle.
-
1997 and later 2.5L XJ, order K2569-0 Upgrade Kit which includes Classic Polyurethane motor mounts, engine brackets, but does not include the support cradle.
-
Sorry, brackets currently not available for earlier vehicles.
- Tighten through-bolts (bolt that goes through bracket arms and motor mount) snug. Do not overtighten locknuts on throughbolts.
-
Bolts to pylons should be tightened like most others on your Jeep frame. Nice and tight.
-
If you have any questions during installation or believe a part will not fit, do NOT alter the part. Call Brown Dog, 866 401-3877. We have extended support to assist with installation.
Application Notes
This pair of mounts fits Jeep vehicles below.
-
Jeep Cherokee XJ, 1984-2000, 2.5L
-
Jeep Comanche MJ, 1987-1992, 2.5L
-
Jeep Wagoneer SJ, 1984-1987, 2.5L
|
|
|
|