A2569-2, 2" MML, Classic Polyurethane

Jeep Motor Mount Lifts, 2" (Pair)
Want Jeep motor mount lifts (MMLs) to help correct driveline angle caused by an extreme suspension lift? Have an abnormal modification that's impacted driveline angle? Brown Dog designed these motor mount lifts to reposition your engine two inches higher than stock (at the cooling fan). This modification results in a dramatic change in the driveline angle.

High Performance Design.
The Brown Dog has friends who experienced a sagging engine one their early Wrangler YJs. This is why we engineered these replacement motor mounts for extreme strength. You'll find these mounts a serious upgrade from most aftermarket mounts, too. We use plate steel and double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull one off the shelf and put it through our 20-Ton Press Test. We have never seen a structural failure on Brown Dog mounts.

• Before ordering these MML, check other components under the hood to be sure you have enough room for a 2" MML. Engine will be raised 2" at the stock cooling fan.
• Motor mount lifts bolt directly to the pylon in the identical position of the stock mounts.
• Carefully inspect engine bracket for any excess wear, especially cracks. The original brackets weren't designed to handle the strength of these high-performance mounts.

Application Notes
Fits Jeep vehicles below with engine bracket opening* between 2.75 and 3.25". Measure between bracket arms where the bracket and mount meet. If measurement is outside this range, please call 866 401-3877 or email info@browndogindustries.com.

• Jeep Wrangler YJ, 4-Cylinder, 1987-1990